simple | Tags | Page 3 | routingjigs.co.uk

Compact Hinge Jig HPL

By: Mike Wyatt
February 20, 2014
0

Functions

Suitable for hinges 50mm to 127mm long and 6.5mm to 35mm wide
Easily transferable between the door and the door frame without adjustment
Engraved markings or easy hinge measurement and setting
Easy to follow, step by step instruction

Curved Worktop Radius Jig (MDF)

By: Mike Wyatt
October 8, 2014
0

Functions

Radius curves at 250mm,200mm, 150mm, 100mm, 80mm, 60mm and 40mm
45 degree cutting angle
Straight edge up to 820mm long with location holes for producing a square cut
35mm and 25mm cabinet door hinge recesses

Curved Worktop Radius Jig (Polycarbonate)

By: Mike Wyatt
August 28, 2013
0

Functions

Radius curves at 250mm, 150mm, 100mm, 80mm, 60mm and 40mm
45 degree cutting angle
Straight edge up to 820mm long with location holes for producing a square cut
35mm and 25mm cabinet door hinge recesses

Drainer Jig HPL

By: Mike Wyatt
February 19, 2014
0

Functions

500mm maximum drainage groove length
Ramped angle can be adjusted from 1 degree to 2 degree
Depth of groove can be adjusted from 7mm to 19mm
Engraved line for perfect lining up with the sink
Accurate and easy to use
Incorporates special Knobs to adjust the ramp angle.

Economy Belfast Sink Jig MDF

By: Mike Wyatt
February 19, 2014
0

Functions

For any sink size between 300mm and 550mm deep
Preset depth holes for 300mm, 320mm, 340mm, 360mm, 380mm, 400mm, 420mm, 440mm, 460mm, 480mm, 500mm, 550mm
Depth setting with 2 pins for accurate alignment
Corner radius of 27mm
Includes four nylon locating pins, a full set of instructions with annotated diagrams

Economy Drainer Jig MDF

By: Mike Wyatt
February 19, 2014
0

Functions

500mm maximum drainage groove length
Ramp angle can be adjusted from 1 degree to 2 degree
Depth of groove can be adjusted from 7mm to 19mm
Engraved line for perfect lining up with the sink
Accurate and easy to use
Incorporates special Knobs to adjust the ramp angle.

Fluted Straight Cutter 12.7mm x 50mm

By: Mike Wyatt
February 20, 2014
0

Cutting Diameter: 12.7mm / 1/2″
Cutting Length: 50mm
Shank Diameter: 12.7mm / 1/2″
Overall Length: 93mm

Good Quality Tungsten Carbide Cutter

For use with Lock Jigs, Stair Jigs and Worktop Jigs

HPL Compact Hinge Jig with Clamping Plate

By: Mike Wyatt
February 20, 2014
0

Functions

Suitable for hinges 50mm to 127mm long and 6.5mm to 35mm wide
Easily transferable between the door and the door frame without adjustment
Engraved markings or easy hinge measurement and setting
Easy to follow, step by step instruction
Made of 12mm high pressure laminate

Lock Jig

By: Lucian Mindrila
February 19, 2020
0

Adjustable LOCK JIG This Adjustable Lock Jig is made of 12mm see-through Polycarbonate with a life time guarantee, never to warp. All our routing jigs are manufactured on the…