Solves Out of Square Problems
The NEW Angle Adjustment System can be attached to the Variable Worktop Jig to enable the professional user to cut worktops to an angle other than 90 degrees.
The Variable Worktop Jig will achieve internal angles from 85 degrees to 95 degrees in a non-restricted continuous movement. Current techniques to overcome non-square walls are not accurate and poor joints are the result most of the time. The Angle Adjustment System will eliminate this and provide a perfectly matched joint. The extra advantage of the Variable Angle Worktop Jig is that it can be used to find and set the angle required.
The system sits into the slot, and the tightening knob screws into the system from below. Using the engraved markers on the jig as reference, the angle adjustment system can be adjusted to change the angle of the male joint.
The system is made of durable aluminium.